Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kimoto, Kazushi*; Okano, Aoi*; Saito, Takayasu*; Sato, Tadanobu*; Matsui, Hiroya
Doboku Gakkai Rombunshu, A2 (Oyo Rikigaku) (Internet), 76(2), p.I_97 - I_108, 2020/00
This study investigates the propagation characteristics of surface wave traveling in a random heterogeneous medium. For this purpose, ultrasonic measurements are performed on a granite block as a typical randomly heterogeneous medium. In this measurement, a line-focus transducer is used to excite ultrasonic waves, whereas a laser Doppler vibrometer is used to pickup the ultrasonic motion on the surface of the granite block. The measured waveforms are analysed in the frequency domain to evaluate the travel-time for each measurement point based on the Fermat's principle. From the ensemble of travel-times, the probability distribution is established as a function of travel-distance. The uncertainty of the travel-time and its spatial evolution are then investigated using the standard deviation of the travel-time as a measure of the uncertainty. As a result, it was found that the uncertainty is approximately proportional to the mean travel-time divided by the square root travel-distance.
Furusawa, Akinori; Nishimura, Akihiko; Takenaka, Yusuke; Muramatsu, Toshiharu
Proceedings of International Topical Workshop on Fukushima Decommissioning Research (FDR 2019) (Internet), 4 Pages, 2019/05
The aim of this work presented here is to demonstrate the potential of our method for remote controllable systematization, of testing reinforced concrete based on ultrasonic guided-wave on rebar. In order to investigate how the deteriorated phenomena has the effects on the ultrasonic guided-wave propagating on the rebar, following experiments are conducted. Test pieces used for the experiments are made of bare steel rod and cylindrically pored mortar to be representing the actual reinforced concrete. Irradiating the end face of the rod with nanosecond pulsed laser makes the ultrasonic guided-wave induced, at the other end face, the guided wave signal is measured with ultrasonic receiver. One test piece is with no damage and the other is deteriorated test piece. The deterioration is made by electrolytic corroded method. The guided-wave signal from the deteriorated test piece is measured with respect to each energization time, the change in the waveform is investigated. Analyzing the results from the experiments above, it is found that the deterioration of rebar has remarkable effects on the guided-wave signal. The signal from test piece with no damage has strong peak at both specific frequency and lower region, on the other hand, signals from deteriorated test piece has only at the specific frequency depending on the diameter of the steel rod. Finally, discussion concerning with the experimental results and future perspective for remote controllable systematization of our method is carried out.
Wan, T.; Naoe, Takashi; Wakui, Takashi; Futakawa, Masatoshi; Obayashi, Hironari; Sasa, Toshinobu
Materials, 10(7), p.753_1 - 753_17, 2017/07
Times Cited Count：23 Percentile：72.44(Chemistry, Physical)Furusawa, Akinori; Nishimura, Akihiko; Takenaka, Yusuke*; Nakamura, Kaori*
Proceedings of 54th Annual Meeting of Hot Laboratories and Remote Handling (HOTLAB 2017) (Internet), 6 Pages, 2017/00
Testing of concrete structures in NPPs is needed to guarantee hereafter workability. Recent work says Core Concrete Reaction advances erosion of the concrete structures of Fukushima NPPs and it's difficult to estimate the correct depth of CCR. In addition, it is clear that seawater intrusion makes the rebar in the concrete structures corroded, thus, advanced remote testing methods for the deterioration should be considered. Gap or decrease of the adhesiveness between rebar and outer concrete appears in its deterioration process. We had a sense of possibility introducing a new testing method based on that. The concept is to propagate laser-excited ultrasonic gathering the information about the deterioration inside and received at distance with LDV. In this work, we investigate and report how it has the effect on propagating ultrasonic along the rebar to decrease adhesiveness between the rebar and the concrete experimentally.
Serizawa, Hiroyuki; Kikuchi, Hironobu; Iwai, Takashi; Arai, Yasuo; Kurosawa, Makoto; Mimura, Hideaki; Abe, Jiro
JAERI-Tech 2005-039, 23 Pages, 2005/07
JAERI-Tech-2005-039.pdf:2.89MB
A high-temperature ultrasonic measuring system had been designed and installed in a glovebox (711-DGB) to study a mechanical property of nuclear fuel containing trans-uranium (TRU) elements. A figuration apparatus for the cylinder-type sample preparation had also been modified and installed in an established glovebox (142-D). The system consists of an ultrasonic probe, a heating furnace, cooling water-circulating system, a cooling air compressor, vacuum system, gas supplying system and control system. An A/D converter board and an pulsar/Receiver board for the measurement of wave velocity were installed in a personal computer. The apparatus was modified to install into the glovebox. Some safety functions were supplied to the control system. The shape and size of the sample was revised to minimize the amount of TRU elements for the use of the measurement. The maximum sample temperature is 1500 
C. The performance of the installed apparatuses and the glovebox were confirmed through a series of tests.
Shibata, Taiju; Ishihara, Masahiro
Proceedings of International Conference on Advanced Technology in Experimental Mechanics 2003 (ATEM '03) (CD-ROM), 5 Pages, 2003/09
no abstracts in English
Shibata, Taiju; Ishihara, Masahiro
Transactions of 17th International Conference on Structural Mechanics in Reactor Technology (SMiRT-17) (CD-ROM), 8 Pages, 2003/08
no abstracts in English
Shibata, Taiju; Ishihara, Masahiro
Transactions of 16th International Conference on Structural Mechanics in Reactor Technology (SMiRT-16) (CD-ROM), 8 Pages, 2001/08
no abstracts in English
Ishihara, Masahiro; Shibata, Taiju
Dai-4-Kai Kozobutsu No Anzensei, Shinraisei Ni Kansuru Kokunai Shimpojiumu Koen Rombunshu, p.101 - 108, 2000/00
no abstracts in English
Abe, Yutaka*; Kawaji, Masahiro*; Watanabe, Tadashi
Proceedings of 2nd Japanese-European Two-Phase Flow Group Meeting (CD-ROM), 6 Pages, 2000/00
no abstracts in English
Ishihara, Masahiro; Shibata, Taiju
Nihon Kikai Gakkai Dai-12-Kai Keisan Rikigaku Koenkai Koen Rombunshu, 5, p.289 - 290, 1999/00
no abstracts in English
*; ;
Carbon, 25(6), p.723 - 726, 1987/06
Times Cited Count：26 Percentile：74.6(Chemistry, Physical)no abstracts in English
